One of the Following Mobile Suit Will Be Announced As the Next Real Grade 1/144 Gunpla Kit Release.. Can You Guess Which One?
This next release will be after the RG 1/144 Qan[T] of course... and is awesome to finally to get a RG gunpla from the Gundam UC series.
New RG 1/144 scale model kit will be announced in 2016!
i'll be really impressed if they make a real grade of a transformable unicorn
ReplyDelete+1 for this post.
DeleteYes it so good
DeleteWould be awesome but the ankle and waist joints are going to be horrible, much worst than the first MG release. Doubt that will be the only problem they have to solve either.
Deletefor sure it will be Unicorn... you know Bandai... its like Gundam Astray Red Frame again... maybe RG Banshee Norn Gundam will be P-Bandai... after that P-Bandai Exclusive Full Armor Unicorn Gundams Parts or Smart Gun and Vibrate Claw Banshee Gundam Parts... After That Maybe Like Gundam Front Event Arrives... There Will Be Another Exclusive P-Bandai Phenex Gundam...
Deletehahahha sinanju came out. and i swear its the worst build out of all rg's
DeletePlz be Unicorn................
ReplyDeleteI want it to be the Stark Jegan, however it's highly likely that it's the Unicorn.
ReplyDeleteI totally agree, though it is far more likely for the other two, I would love to see stark jegan made as an RG. I've always like the simple elegance of grunt suits, especially customized grunt suits.
Deleteit's most likely the unicorn if u think about it. some, not all of the RG, had PG before they they were RG (EX: Strike Freedom, 00 Riser) also although it was a fake, there was a poster of the unicorn being the next RG before we found out about the 00 Qanta and alot of people were wanting it. it could be the sinanju if they havent figured out how to make the RG Unicorn transform but probabe not the Stark Jegan
DeleteThe Stark Jegan would be interesting because it would seem to be completely coming out of the blue unlike the other two. But I don't think they would go with that obscure of a grunt MS.
DeleteWhile they have pulled off the transformation with the PG Unicorn it would be really hard to have scale it down to this size.
Thus I would have to go with Sinanju.
Shining or god Gundam or tallegeese or epyon. Oh please be epyon
ReplyDeleteNone of your mentioned suits are in the choices, buddy.
Deleteepyon or white epyon i want them please
Deletei think there is no choice, three ms up there are just promotional pic we can't quaranteed that the next rg is one of those 3 ms
Deleteooh i'm sorry i do't see the text at the bottom of the pic, you're right bro
DeleteI hardly think it be the stark Began. But seeing as they're going for an all main gundam theme with the last few releases. It probably going to be the unicorn.
ReplyDeleteBUT, if it might be the sinanju since there has been a large dip in zeonic real grades. So I say its a 50/50 between the unicorn and sinanju
Probably unicorn...
DeleteBandai will not produce an antagonist ms before the protagonist ms...
Why not if it is sinanju? Would be nice though
ReplyDeleteI'd definately replace my GH Sinanju for an RG. Not that its not a great kit. An RG version would just make me go nuts though.
Deletei just want rg alex
ReplyDelete[citation needed]
ReplyDeletePretty sure it's going to be more AU garbage.
unfortunately that probs right dude
DeleteNot if the picture's quote is correct. It doesn't say could the next RG be one of these three. It says one of these three is the next RG. Can you guess which one. So either they are lying or it can't be AU.
DeleteObviously Unicorn but it will be surprising if it's the Sinanju.
ReplyDeletetrue
DeleteBut it is Sinanju.
DeleteThis comment has been removed by the author.
ReplyDeletei just wanr rg alex
ReplyDeletedoesnt matter, will still get whichever comes out
ReplyDeleteIs it just another Rumours like PG Sinanju or there's a valid source mentioned about Unicorn Line in RG.
ReplyDeleteRg sinanju would be awesome
ReplyDeleteMy best bet would be Unicorn if the news is real
ReplyDeleteJust like Atray, they will probably make these in 1 RG frame
Banshee, Banshee Norn, Banshee Norn Awakened, Unicorn Awakened, Phenex, Full Armor Packs.
a whole bunch P-Bandai Opportunity, more money, lol
Deleteplease be sinanju... then maybe... we will get a sinanju stein P bandai.. which i would pay through the nose for.
ReplyDeleteis this based on an actual poll from bandai?
ReplyDeleteFist must be unicorn, second is shinanju
ReplyDeleteAin't the next RG 00Quanta?
ReplyDeleteIt is gonna be quanta but they already have the design hashed out for it. They are putting that into production and starting design on the next RG
DeleteAmong those 3, Unicorn will be the first one to have a RG, thanks to it being a lead Gundam.
ReplyDeleteI prefer either ZZ or Nu to have the next RG though.
I highly doubt the ZZ will get a RG. It's combiner mode transformation would not work as well with the completely independent internal frame gimmick. It's bulk would make it likely to be very saggy and a brick.
DeleteI would love a Nu though I wonder how they would handle the fin funnels.
I think it is unicorn since bandai can milk the molds for banshee, awakening ver etc. jegan???? RG treatment for a grunt suit? not good. sinanju possible too then stein parts is pbandai! evil!
ReplyDeleteWell, Bandai did release an RG Zaku II and an RG Z'Gok (the Char variant though) so it is possible they'll release a grunt unit like the Stark Jegan. And it's popular with the fans anyway (not as popular as the Jesta though). :)
Deletewhy not Impulse?? Destiny already roll out bcoz this not fair that Impulse should roll out instead Destiny bcoz this is wrong now.....just be like strike to freedom and then strike freedom, isnt that it great be like that??
ReplyDeleteWhat... the fuck?
DeleteMust be the Unicorn... If you think about it, Bandai can milk a lot from the unicorn with a lot of P-Bandai releases. hohoho
ReplyDeleteSinanju Please Bandai i would buy it in a heart.
ReplyDeleteIsn't it obvious? Protagonist suits always gets the priority release.
ReplyDeleteTeasing us with a Stark Jegan is just cruel...
DeleteI want RG Virtue.
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteWait, RG 00Q was the next suit after RG Wing Zero EW, right?
ReplyDeleteYes, these might be released after Qan[T]
DeleteGod I hope it's not Unicorn...
ReplyDeleteMy suspicion is that they'll make either a non-transformable RG Destroy mode and Unicorn mode Unicorn gundam OR an RG Sinanju since the Jegan doesn't really have that much profitability imo
ReplyDeleteI think so too. I don't think bandai can make a transformable Unicorn which has very good quality, articulation and reliability. It should be a fragile RG if they did.
Deleteplease not the Unicorn, the MG is a horrible kit.
ReplyDeleteMG is rather heavy kits actually, many MG that fail end up doing well in RG mainly because RG is so much lighter, even when the joint is loose they can still stand properly and do some stunny action.
DeleteRG certainly can be done with current tech, maybe not completely transformable, but looking back at my SCM-Pro Unicorn which is transformable with interchangable parts i strongly believe that over years they would had figure out some way to make the transformation better in RG.
The Unicorn is a terrible kit, oh yeah, but it looks freaking amazing. When it was release we just couldn't believe our eyes, for god's sake. Stop this "terrible kit" nonsense.
DeleteMG Heavy Kits? Well of course they're heavy because they're big. But really most of the MG's you're talking about that does well in RG are old 1990s-2005 MG kits that have low plastic quality, poor articulation etc. MGs nowadays are so much better in engineering, tightness, great quality and many many poses can be achieved etc. Just look at the Hyaku Shiki Ver 2.0 or RX-78-02 The Origin for e.g.
DeleteBut I digress, about the RG Unicorn. I don't think Bandai would take such an approach to the transformation, the one selling point of RG's is that its cheap, not like HG but cost effective for its size. I think a Unicorn Mode kit and Destroy Mode kit would be much more likely. Interchangeable parts might be possible but with the psycoframe and the frame itself you would have to pull off armour pieces to accomplish this. And I for one would prefer the much simpler Unicorn and Destroy Mode separate kits than frustratingly pull off the armour and replace with the other.
yes the unicorn is a horrible kit, at least it was for me.
Deleteit took the wind out of my sails.. even had to take a break from gunpla.
now im back and building a Utopiacast 1/100 Kshatriya.. and its ten times the fun as a unicorn.
(but thats my personal opinion)
Sinanju would be GREAT !!!
ReplyDeleteDeathscythe Hell
ReplyDeleteJegan euy..
ReplyDeleteStark Jegan please :)
ReplyDeleteAnd to everyone's surprise, Bandai will release an RG Juaggu. :3 But seriously, it's definitely the Unicorn, and a transforming Unicorn at that. :)
ReplyDeleteAn unexpected RG Juaggu would be hilarious!
DeleteRG 00 Qant guys..
ReplyDeleteTo be honest I rather have the Jegan be made into an RG, besides the Zaku and Zgok there isn't any other Grunt suit from the RG line, and a few more grunt units can't hurt at all. Unicorn is nice but i can't really fathom a 1/144 that is transformable.
ReplyDeleteMost probably Unicorn (so far they gave priority to lead suits, except the Zaku II but that's a pretty iconic suit), but I hope we'll see an RG Sinanju as well.
ReplyDeleteAnd the RG Z'Gok....
DeleteI think it'll be unicorn. But i would love to have a rg sinanju.
ReplyDeleteAlso i highly doubt it'll be rg stark jegan
Regardless what is the next RG, i will buy it anyway. RG is the best line in GunPla for me ;)
ReplyDelete*I choose RG Sinanju since it's easier to do in 1/144. RG Unicorn with transformation will be too insane O_O
plese Unicorn.. and become to MG Unicorn 2.0 :p
ReplyDeletei don't want rg unicorn , first rg is 1/144 scale ,to transform the unicorn might be very hard. i want BARBATOS AS THE NEXT RG KITS OR MAYBE RYUSEIGO OR EVEN GUSION REBAKE, If ban-dai can't make them true just add impulse to the next rg lineup. thats all.
ReplyDeleteIts Bandai. Not Ban-ai. Putting what you want in all caps just makes you come off as a jackass. It really is about time that we got a Gundam UC Real Grade kit. I think it will be the Unicorn, which is the obvious choice and the Jegan will be an Expo exclusive. We will get an RG Barbatos probably after a Gundam UC kit. But really it is up in the air because of the fact that the Barbatos already has an inner frame. The extra detail will be amazing but I think we will not get a Barbatos until later this year / next year.
DeleteUh, why must rg jegan release as expo item when reason for p-bandai/expo version exist because bandai made standard release first.....
Deletestill waiting for tallgeese RG
ReplyDeleteObviously the Stark Jegan.
ReplyDeleteI hope it's not the Sinanju. I don't like the RGs but that might be too much for me.
I want the sinanju or jegan. But i think we all know that Bandai will release the unicorn . Unicorn is a nice design,and i love it too, but im just tired of seeing tons and tons of unicorn kit released . Bandai must release something fresh .
ReplyDeleteAs much as I'd love the Stark Jegan, I don't see them using a grunt suit to introduce the RG line to Gundam UC. I'll vote for the Sinanju, but I'll bet it's the Unicorn.
ReplyDeleteUnicorn please!!
ReplyDeleteTallgeese 3 pls
ReplyDeleteToo f**kin obviously Unicorn, you can milk that mold to high hell and back:
ReplyDeleteNormal
Banshee
Banshee Norn
Phenex
Final Battle
Special Coat/Metallics/Clear
wasn't there a post of "RG line in inspection" which sillhouette showed gouf and other grunt units? I think we just have to wait for the real deal XD
ReplyDeleteAre they really gonna tease us with a RG Stark Jegan? Thats just cruel. The REGULAR Jegan doesn't even have a MG. Without a a doubt it'll be either the Unicorn or Sinanju... and probably eventually BOTH.
ReplyDeleteUnicorn would be too complex (too many small parts)
ReplyDeleteSinanju may work.
Unicorn. Then you'll have p-bandai unicorn green mode; frame can be re-used for banshee, which will also p-bandai out a green mode. and maybe p-bandai for full armour & BN weapons.
ReplyDeletea sinjanu would be awesome though. the gold linings would be probably be those sticker type though.
Sinanju please... really want one... bt cnt afford mg T.T
ReplyDeleteIt will be the sinanju.
ReplyDeleteIts the Sinanju.
ReplyDeleteNo unicorn yet, troublesome kit to design as a RG. Would need 2 releases, destroy and normal mode
Stark Jegan, not happening.
Or maybe it's all three and this is just an elaborate rouse
ReplyDeleteUnicorn
ReplyDeleteMSA 0011 s or ex-s, F91,
ReplyDeleteMost likely the Sinanju is the next rg jegnan is no that popular and unicorn is to complex to make at list i thing
ReplyDeleteMy bet is on Unicorn for the possibility of banshee and others, but it wouldn't hurt to have Sinanju too (though it might feel tricky on the gold trim part)
ReplyDeletePersonally would love the jegan as I feel it would the most possible of the three not overly ambitious like a unicorn and not overly reliant on decals like an rg sinanju would inevitably be
ReplyDeleteAnyone doubting it will be the Unicorn needs to open their eyes and see the writing on the wall, much like the original Gundam it's become one of the the most shilled MS they have, sick of it as we may be, it's not going to stop.
ReplyDeleteZZ Gundam or S Gundam would benefit from a RG design.
ReplyDeleteif is unicorn , there will be destroy mode and FA backpack from p-bandai .
ReplyDeleteas a new frame , they can use as banshee m norn and green destroy mode for p-bandai .
1 frame for all use even phoenix , bandai is smart , unicorn is the best money making frame so i will guess its gonna be unicorn . btw wheres astray green and gold frame ? i guess those will come out before thay make new frame for this
I hope the Sinanju but the Unicorn seems more likely.
ReplyDeleteIs this even real? Where is your source?
ReplyDeleteWhy not zz gundam? RG Hyaku shikki? Gouf? Unicorn line already overused. And got enough love.
ReplyDeleteWhile I agree with the ZZ because of its 35th anniversary, I think its still too complicated to be in RG form and might end up as a disastrous model like the Zeta.
DeleteAre these for sure the proposed kits? I would really love if Bandai actually stuck to their promises and assertions! I'm still waiting for RGs from the Wing Gundam: Endless Waltz OVA. Where are Deathsycthe Hell Custom, Heavyarms Custom, Altron, and Sandrock Kai/Custom? I'm really hoping for a Heavyarms Custom RG. Apart from what they PROMISED, I would love to see a RG or P=Bandai of Gundam Ashtaron Hermitcrab from Gundam X (only gundam to not get a kit) and the Astray 0 Custom (heck even just a HG).
ReplyDeletep.s. If they could do another suit from Gundam X, I'm hoping it's the Rasveht in a HG/RG/P-Bandai. Please Bandai stop redoing the same kits over and over again!
Sinanju
ReplyDeleteRG gm or guntank please
ReplyDeleteI really want RG Ground Gundam or Ez-8
ReplyDeleteSo ummm..... No love for nu or sazabi or hi-nu? That's sad.....
ReplyDeleteI Want to RG unicorn gundam
ReplyDeleteNu Gundam. I've been holding off on the MG Ver ka. to see what Bandai will do with the RG.
ReplyDeleteUnicorn!!!!!!! Please!!!!!!!!
ReplyDeleteHoping more love for Tierens and Aheads from 00, and the Gundam X universe.
ReplyDeleteBloody RG Unicorn
ReplyDeletePersonally hoping for the Sinanju~ Though if they make the Unicorn the winner i will only buy it if it can transform~
ReplyDeletesazabi or sinanju
ReplyDeleteeveryone expect UNICORN, but no way, then no UNICORN means no SINANJU, so it's probably the third one.
ReplyDeleteWhere did you guys get the info? Is Bandai leaking info to a English language blog for some reason?
ReplyDeleteMaybe Gundam Guy has his secret source that he cannot reveal because he and or that guy would get in a lot of trouble?
DeleteIt is no surprise that Bandai loves to spam the Unicorn Gundam so I kind of expected to see an RG Unicorn.
I'm quite disappointed in this release. I knew the next RG after 00Q[T] would be from the UC lines. and I was hoping for ZZ or Nu or even S Gundam(this would be a real shocker if they go with it).
ReplyDeletesigh.. nevertheless rooting for the stark... screw unicorn n sinanju. You're quite new to get RG treatment. No fun in the design which doesn't change much from the HG line. fingers cross real hard says it's Stark jegan.
As much as I am annoyed with it, I think RG Unicorn is most likely the next one. >_<
Deletei bet next year we will have RG aile strike ver.2.0 but seriously i wanted to have Nu Gundam and so much curious on how they could make those triple open face vents on RG.
ReplyDelete2.0 aile..., no way man it's too early,
Deletei guess....
is that you, suiton?
DeleteEven if they did an RG Aile Strike Ver 2.0, I wouldn't buy it since I don't buy RGs for Seed/Destiny. I prefer to just stick with the newer MGs for Seed and since we are gettin MG Freedom 2.0, I assume they will want to rehash that ZGMF frame over and over to do RM Ver of existing MGs and new ones for ones we never got like Justice, Saviour, and Blast Impulse...
DeleteSo 2.0/RM for:
- Infinite Justice
- Force Impulse
- Sword Impulse
- Destiny
- Strike Freedom
And maybe we will finally got a MG Akatsuki Oowashi, MG Akatasuki Shiranui, MG Providence, MG Legend, MG Chaos, MG Abyss, and MG Gaia??
Whoa, calm down with your wishlist . The RG line itself is not that outdated . Why would Bandai do a ver 2.0 of the kit ?
DeleteI was just making a point in regards to a comment that "Anonymous" posted about the RG Aile Strike 2.0.
DeleteAs if bandai will ever release another non-gundam RG
ReplyDeleteI am thinking it's going to be Shinanju just because if it's Unicorn, it will be so big, there is no need to even bring up this teaser post.
ReplyDeleteIt's a trick question. They are receiving all of them at once!
DeleteRG Unicorn Gundam Pls
ReplyDeletestark jegaaaaaaannnnnnn pleaseeeeee... :D
ReplyDeleteIs no one else noticing that most of the rg kits have been suits of a specific size unicorn & sinanju are too big. The only one that makes sense is the jegan. Or none of these are real & this is straight click bait. Where is your source coming from Gundam.guy
ReplyDeleteThat's not a valid point. Height /size doesn't matter. Wing kits have a smaller body and longer legs then UC kits and shocker they made a wing zero custom.
DeleteOf those three? Definitely the Stark Jegan. Unicorn and Sinanju has gotten enough love already from other lines. Heck, I'd choose ANY Feddie grunt suit over them.
ReplyDeleteAs for the future, more 00 suits would be cool as well as the Gundam X and X Divider.
I hope that RG 00 QanT Trans AM is made.
DeleteIt is so stupid that Bandai did not make one for HG or the MG. Maybe we will get a Premium Bandai one later in MG?
But I think it is weird that we do not have the Repair 2 in RG and also Exia Roll Out, Exia Avalanche Dash, Exia Repair 3, 00 Gundam 7 Sword/G, and 00 Gundam 7 Sword/G Inspection Colors.
There is a coversion kit for R2 and R3
DeleteI am talking about a legitimate, Bandai RG release; not like a resin or something like that. So far, there's only a conversion/add on set for the Repair 1 version.
DeleteMy one concern is if they actually did the Sinanju how would they handle the gold trim? the stickers are a pain in the butt.
ReplyDeleteWell they could do it as water slide decals or the RG style metallic stickers.
DeleteOr you could paint it?
wait, is this news even real confirmed from bandai itself or its just making opinion thread? hehe..
ReplyDeleteUnicorn gundam destroy and normal mode. Inside 1 box please. (I's tranformation)
ReplyDeleteI bet they will make each and every variation a separate release Unicorn Mode and Destroy Mode.
DeleteThat choice makes more money for Bandai.
Hazel Advanced Gundam
ReplyDeleteLooks like it's officially the Sinanju (Judging from recent posts)
ReplyDeleteWhy do you think it would be Sinanju?
DeleteWhat recent posts are you talking about?
If you think about it logically, the Unicorn has the most variations.
Also I don't think they will be able to replicate the transforming in RG so I think they will do a separate release for Unicorn Mode and Destroy Mode.
So imagine how many variations they could do; most of which would likely be that damn Premium Bandai release.
RX-0 Unicorn Gundam [Destroy Mode]
RX-0 Unicorn Gundam [Unicorn Mode]
RX-0 Full Armor Unicorn Gundam [Unicorn Mode] (red)
RX-0 Full Armor Unicorn Gundam [Destroy Mode] (red)
RX-0 Full Armor Unicorn Gundam [Unicorn Mode] Final Battle Ver (green)
RX-0 Full Armor Unicorn Gundam [Destroy Mode] Final Battle Ver (green)
RX-0 Unicorn Gundam 02 Banshee [Destroy Mode]
RX-0 Unicorn Gundam 02 Banshee [Unicorn Mode]
RX-0(N) Unicorn Gundam 02 Banshee Norn [Unicorn Mode] (yellow)
RX-0(N) Unicorn Gundam 02 Banshee Norn [Destroy Mode] (yellow)
RX-0(N) Unicorn Gundam 02 Banshee Norn [Unicorn Mode] Final Battle Ver (green)
RX-0(N) Unicorn Gundam 02 Banshee Norn [Destroy Mode] Final Battle Ver (green)
RX-0 Unicorn Gundam 03 Phenex [Unicorn Mode]
RX-0 Unicorn Gundam 03 Phenex [Destroy Mode]
So that's at least 14 releases there potentially.
And then add in 2 more:
RX-0 Unicorn Gundam CODE 852 VER [Destroy Mode]
RX-0 Unicorn Gundam CODE 852 VER [Unicorn Mode]
Then there's 16 releases all together through retail release, Premium Bandai release, and convention exclusive release.
Why wouldn't Bandai want to spam out Unicorn kits again?
It literally prints money for them to do so.
It's the sinanju. The unicorn currently is feasible do to how fragile it will be. Besides I'm sure bandai realized that there are large number of people who are sick of the unicorn and it variants. It won't be the Jegan because the jeagn isn't popular. That leaves the sinanju.
DeleteI'm talking about the recent post about the UC TV series, but yeah, I would actually love an RG Unicorn nonetheless
Deletei called dibs on RG sinanju!! unicorn just got PG treatment last year, so it's highly unlikely. the last nanju gunpla is 2013 in MG form,so 3 years gap would make a good excuse for another release. stark jegan? well, not many fans would anticipate it so if they dont wanna think about profit, then go ahead.
ReplyDeleteRG Stak Jegan and Jegan D P-Bandai Exclusive ... my very dream
ReplyDeleteprobably Sinanju. would be really impressed if they made an RG Kshatriya though. imagine the price tag on that one! lol. still waiting for the Wing Gundam Series to finish though, especially Sandrock. Sandrock don't get much love from Bandai. :|
ReplyDeletelet's see, a gundam, an ace custom suit that would only ever be released after said gundam, and a jegan... gee i wonder
ReplyDeleteRG Unicorn seems too obvious.
ReplyDeleteI am putting my bet on RG Sinanju, and then RG Unicorn (and all of those variations).
But I don't care since I just want the RG 00 QanT ASAP and hopefully we get a Full Saber add on set, Trans Am variant, ELS variant, etc.
And where's Exia Repair 2, Exia Repair 3, Exia Avalanche Dash, Exia Roll Out, and hm... 0 Gundam Type ACD, 0 Gundam Roll Out, and Reborns?
Good Good, So Bandai planning To make Rg From The Unicorn Series. Just Wondering:
ReplyDelete-One Does not simply, Bandai Will make
a Rg Unicorn That can transform, or
Make it into seperate mode?!
-What If I told You, There was Big
Planning of P.Bandai Exclusive in This
Line/Series !?
-Waiting Rg Unicorn Gundam Announcement
and Hope There was no single part that
to small and easy to break !? "......"
-Just already buy some Gunpla From This
Line/ Series and Thinking Should End
Now? "NO", not yet ....
-Gunpla ...... More You Thinking about
it, More You Buy It !? "......"
( Up To You )
-Make a RG Unicorn, And Hope There was
No single part To break !? "......"
-P Bandai Exclusive, P Bandai Exclusive
every Where !?!?!?!? "..........."
Meme: ".........." ( Up To You )
We've seen what bandai can do with all these crazy rg design we had up till now. it even inspires MG's. unicorn or sinanju is not an exception. They both are coming and i'd love to build any of em
ReplyDeleteI don't see how the MG Unicorn and Sinanju would be inspired by a possible upcoming RG Release.
DeleteYo Gundam fella, whats the source? With the upcoming Unicorn TV series i wouldnt be surprised with this.
ReplyDeleteCome On UC▼
Opetion meteor... Haha
ReplyDeleteIf it's going to be Unicorn, I prefer it to be non-transformable. Why? Have you guys tried to build RG Zeta? I know they don't share the same frame but considering how fragile the RG frame is, you know it's not a good idea.
ReplyDeleteStill, they are Bandai, if they want to make it transformable to impress us then they can.
Ɐ
ReplyDeleteRg super fumina would be hilarious!!!..
ReplyDeleteI actually hope infinite justice which will be released,
ReplyDeletebecause I really wanted to complete my rg collection from seed and seed destiny series
so please bandai, i just need infinite justice
and waiting for infinite justice rg now just like when I'm waiting for the strike freedom rg released
moment where rg still in number 6 , skygrasper
Unicorn for sure, since the main protagonist always comes with this grade. Then probably comes the barbatos. (:
ReplyDeleteSinanju Confirmed guys. I wish Full Armor Unicorn Next Year.
ReplyDeleteThanks for your informative article. Your post helped me a lot in understanding the career prospects in Mobile repairing....Mobile Repairing Institute in Delhi & Laptop Repairing Institute in Delhi
ReplyDeleteIn Japan they are saying shinanju is coming out pretty soon
ReplyDeleteWho would have thought that after RG 00Q will be Sinanju eh?
ReplyDeleteIf could, Unicorn, Barbatos+up til 6th form, Deathscythe Hell Custom/Epyon/Tallgeese, Reborns/Virtue+Nadaleeh, or Aegis. Not sure if it possible.
ReplyDeleteSinanju came out! And I swear it is unbelievably shiny.
ReplyDelete