Sunday, January 19, 2014

Dragon Momoko 1/100 OZ-00MS Tallgeese III - Box Art & Manual Images

Dragon Momoko 1/100 OZ-00MS Tallgeese III - Box Art & Manual Images

Image via Xiaot

69 comments:

  1. Bandai needs to step their game up!
    MG Tallgeese 3... Come on Bandai!

    ReplyDelete
    Replies
    1. shut up suiton!
      bandai is dumb enough by not releasing tallgeese 3 and the rest of the endlesswaltz version even they already have the mould..

      Delete
    2. Suiton needs to step is game down!
      Stop spamming... Come on Suiton!

      Delete
    3. #bansuitonfromGG:
      Suiton it's kinda right,'cause Third Party manufacters are f***ing bandai,to the point that they're releasing P-Bandai exclusives like normal releases,so...Bandai has a yellow light!

      Delete
    4. Just shows how stupid you are Charlie. Bandai will release the rest of the EW kits including the Tg III. But they will wait until the anniversary of wing to do it. That way they can capitalize on people feeling nostalgic towards the series. But what your tiny brain dead mind can't comprehend it that bandai is a Japanese company not a American company. And wing did horrible in Japan so bandai isn't going to just throw kits out there that they May not make a lot of money on for no reason. The remain EW kits have a good chance of being p-bandai exclusives since REAL COLLECTORS AND BUILDER will buy the kits unlike you. Go ahead and by the knock off everyone in Charlies mind that will show a demand for the TG III which will force bandai to release it. Even though 3rd party companies have nothing to do with bandai.

      Delete
    5. Have you looked at the sales for MG Tallgeese compared to other MG suits in 2013?

      Delete
    6. To the Anon 5:56:

      Actually, Wing did pretty well back when it was released in Japan. It wasn't the best, but it did pull in quite a lot of people into the Gundam meta-series itself. The series that didn't do so well was G Gundam, actually. Being that G Gundam didn't become a hit when it was released, there was less money to go around when production for Gundam Wing and Gundam X came about. In the end, I think it was because G Gundam flopped with Japan that there wasn't enough money for Gundam X, so it ended up getting taken down after the 25th-27th episode (Someone correct me if I'm wrong).

      Delete
    7. Shut up Suiton you giant douche!

      Delete
  2. So GG promoted bootlegs now? oh wait there is no MG tallgeese 3

    ReplyDelete
    Replies
    1. Technically it still a bootleg since it pretty much uses MG Tallgeese, MG Epyon heatrod and HG Tallgeese III parts.

      Delete
    2. nope.. i saw bandai's TG III manual... quite different especially on the weapon and shield are original molds

      Delete
    3. yeah I just checked yesterday and the shield and weapon has split parts, surprisingly.

      Delete
  3. Screw bandai theyre kits are so expensive compared to bootlegs

    ReplyDelete
    Replies
    1. and here, people, we see a retard

      why the hell do you think bootlegs are alot cheaper than bandai?

      Delete
    2. Yeah how dare a business try to make money off of consumers willing to pay more for a better product!!

      Delete
    3. Thats because Bandai actually design the products. Product design isn't cheap. The bootleg companies just copy the molds.
      If there was no Bandai then there would be no Gundam, so stop being such a cheap ass brat.

      Delete
    4. You expected an original kit to be as cheap as bootlegs? I wonder what planet you are from...

      Delete
    5. anyway bandai sucks thats all

      Delete
    6. irritating thing about bandai is they always recycle their molds just to earn some cash (for example: unicorn phenex) screw bandai that's what you get now bootleg companies are surpassing your kits

      Delete
    7. SCREW YOU MORE ANON 10:31

      Delete
    8. expensive but worth it to buy.. you pay more you got more.. that all I want to say..

      Delete
  4. The kit is very magnificent judging by its looks i think it even surpass the bandai's quality original design ^^

    ReplyDelete
    Replies
    1. No it doesn't. I've seen this and many more or several forums. The parts be excess flash that requires a little bit of sanding. The regular tallgeese Kit is better.
      If you guy want a link or to see more pics of this. Then join a actual forum instead of waiting on gg. Hell this info is actually a couple days old.

      Delete
    2. How can it be worse than the tallgeese? Since this is the mg tallgeese with some extra parts.
      In terms of price it probably would not differ that much from the bandai release(when released).
      For now i'll make due with the knock off, already ordered it since it is so awesome.

      Delete
  5. Congratulations, Bandai. THIS is what you get for your oh-so-gloriously shitty delaying tactics.

    ReplyDelete
  6. Dragon Momoko's release of MG TG III and the confirmed announcement of Dragon Momoko's Nu Ver ka makes me think that the rumors that DM is a sister company of bandai.

    ReplyDelete
    Replies
    1. Nahhh, with today's technology like the 3d printing is a bit more mainstream than before, they can make their own original molds which can be equal or surpass Bandai.

      Delete
    2. Oh please... DM is a Taiwanese company (according to the sources), Bandai has been trying to sue them for all they're worth, but sinc Japan and China are not in good terms, Bandai is having a tough time shutting these bootleggers down. Plus, 3D scanning and 3D printing technology has gone through a lot of improvements in the past 5 years, so bootleggers can make perfect copies of legitimate items. Though bootlegs can make good copies, but they can't match the precision engineering that Bandai does. So far they are having trouble copying the plastic injection technique Bandai is using on their RG line up. But with these ever improving copying technologies that are getting readily available, it's possible that bootlegs of the RG line will pop up in the market in the near future.

      Delete
  7. Dragon Momoko has the forward thinking of adding pretty effect parts and a heated effect Heat Rod.

    I hope Bandai matches this rather than dismissing this as some kind of gimmicky practice.

    ReplyDelete
    Replies
    1. Ever heard of the Hongli bootleg brand? They also tried pulling this same stunt by releasing an MG Shenlong kit with the Liaoya (a.k.a. Dragon Fang Sword). The legendary armament for the Shenlong Gundam that only appeared in a magazine scan.

      Delete
  8. Really want this for the mod parts. Can by the EW Tallegeese MG for the genuine parts then mod with DM.
    The remainder can be used to make a LEO!!!

    Where can I buy??

    ReplyDelete
    Replies
    1. DM's Epyon also come with orange heat rod and it is about $45(shipping included) Tallg 3 should be slightly higher because of newer kit and custom job.

      Delete
  9. When can I get this kit ?

    ReplyDelete
  10. Where does one go about buying dragon momoko kits?

    ReplyDelete
    Replies
    1. You can buy cheap gundam bootlegs at 168 divisoria mall 4th floor at the philippines ^_^ yeah bandai Sucks

      Delete
    2. @anon 11:36
      I'm no bootleg hater, but bandai doesn't suck, and you're a retard.
      tang ina mo gago

      Delete
  11. This is no bootleg... bootleg is a copy of imitation of the original kit. does bandai have a MG TG 3? Think first before you speak... @_@

    ReplyDelete
    Replies
    1. no oh oh, still this is a bootleg.. same molds from the TG1 and Epyon... without the molds they can't reproduce this. so think before you type :)

      Delete
    2. nope
      this kit has some newly molded parts,
      bootlegs just straight up copy shit, this one not so much

      so yea...proven you wrong anon

      Delete
  12. Ok can somebody please give me a link to pick this up because I've been waiting forever for a MG tallgeese III

    ReplyDelete
  13. being poor is painful isn't it? =)

    ReplyDelete
    Replies
    1. Nah... Being poor is not...

      I'm not poor yet I'm just PRACTICAL...

      Delete
    2. @anon 3:40
      spoiled little richkid aint ya? you little fucker.

      Delete
    3. What are you moaning on about, this kit is actually allot more expensive than the MG would probably be. Seriously at HLJ you can buy most MG's at 35/40 dollars with exception of the more larger MG kits. And if Bandai wants to wait a million years to release this kit than don't blame us for buying it from a third party. Even Gundam X got its first MG finally after fucking 20 years!

      Delete
  14. Duh. They're expensive because of the amount of work put into them as opposed to bootlegs who copy Bandai kits. If you don't have the money to buy the original stuff, better shut your trap. Bootlegs will NEVER be Bandai. And I bet that Tallgeese 3 is just a copy of some original resin kit built by a not-so-famous company/group.

    ReplyDelete
    Replies
    1. But you think this KIT is awesome???? ^_^

      Delete
  15. When Bandai gonna release the rest of EW version Gundam and also tallgeese 3.

    ReplyDelete
  16. i want to see this this be built and reviewed here in GG so everybody could see what it really looks like, i'm curious to how this bootleg would compare to bandai's MG line

    ReplyDelete
    Replies
    1. Its as if was made originally by bandai...... seen it in divisoria 168 and 999 and its so cheap. I think it is sold for only P650.00.

      Delete
  17. Prime92 has reviewed a few of DM's kits, and while they are mostly knockoffs, they are apparently very good quality knockoffs. In fact, they have actually made better looking kits than their official counterparts, and DM has added some extra parts and has modified others to achieve this effect. I thought their KO of the HG AGE-1 Razor and Gerbera Tetra looked pretty sweet.

    ReplyDelete
  18. going to be release after Chinese new year

    ReplyDelete
  19. The only new part of this kit are the Mega cannon, Shield + heat rod, Head and shoulder armor. Its very easy for a 3rd party to copy and upgrade the existing MG Talgeese

    I'm very proud of you Chinese people though you copy too much, you made them improve better than their original counterparts. very good job =) - remember MC Hi Nu Gundoom, XC Destiny and SF's Wings

    ReplyDelete
  20. All of you here are sick retarded collectors, probably all you are nerds and doesn't even have a girlfriend, only gunpla in short all of you are losers there are a lot of important thins in the world come on gunpla is only toy for kids not 4 adults with a childish mind be matured enough losers and find yourselves a girlfriend ^__^

    ReplyDelete
    Replies
    1. Then why you loser here too?

      you don't have a GF isn't it hahaha :P

      Collecting is part of life... not a replacement of something important ^_^

      Delete
    2. Well... I got a steady job, married and recently my wife gave birth to our first son. And yet... I'm a Gunpla collector till today... So does that make me a kiddie and not an adult?

      Delete
    3. Apply burnheal to the original loser himself, anon 7:55
      I've known gunpla collectors and enthusiasts similar to the guy above, Married, has a stable job and has kids who shares the interest in gunpla, you however spend time in threads and blogs like this, butthurt, trolling people, laughing behind the monitor, now tell me, who's the loser again? #bobopota

      Delete
    4. my girlfriend loves gunpla too dude... don't make any comments or conclusion if you did't know a thing here...

      Delete
    5. I am a well off businessman, have 2 kids and a beautiful wife. Yet i collect various kinds of bandai/bootleg items which i feel best for my collections. I also encourage my children to do the same so i could lure them away from vices. So, would that makes us immature? And for the record i bought an original neo zeong and nightingale which cost around 20k and 6.8k respectively. Are these what u call a kid's toys must haves? Get your brain straight. With that expensive collection, would it be made for children? I think you better go back to school and educate your self more.

      Delete
  21. The site for this company is in Chinese, so how might somebody who doesn't know Chinese buy one?

    ReplyDelete
    Replies
    1. I can see most of the people posting here are from the Philippines, if ever you're in the Phils. Go to Divisoria 168 mall you'll find Anime bootleg shops there that offer these kits for way less. or, you can check the site Sulit.com.ph you'll find some sellers there selling DM and Hongli kits.

      Delete
    2. Hey, if you are trying to buy this in United States, you can get it from www.DragonMomoko.com

      Delete
  22. this kit have alot of loose parts (as expected from a bootleg) details are very good and sharp, but it is just the amount of loose parts that drags this kit down for my criteria.

    ReplyDelete
  23. i dont classify this as a bootleg
    i classify this as a third company product
    also we might have a resolution with suitons wishlist

    ReplyDelete

Gundam Guy Blog

Related Posts with Thumbnails