Wednesday, November 25, 2015

RG 1/144 00 GNT-0000 Qan[T] @ Gunpla Expo World Tour Japan 2015 (Akihabara)

RG 1/144 00 GNT-0000 Qan[T]
(Release Date: May 2016, Price: 2700 yen)

GG INFINITE: ORDER HERE








50 comments:

  1. I hope Bandai will release Full Saber but I'm sure it won't lol

    ReplyDelete
    Replies
    1. psssssst *p bandai*

      Delete
    2. There is a chance that they might release it as a supplement like they did for the "Wings of Light" with the RG Destiny and Strike Freedom Gundams. I think they also released the GN-Arms as a supplement for the RG Exia too. So don't lose your hopes just yet! ;)

      Delete
    3. It'll most likely be a P-Bandai release. You could just get the hg 1/144 version, less detail same concept

      Delete
    4. I hope so too, maybe they will release it as a P Bandai exclusive.

      Delete
    5. Most likely going to be a premium.

      Delete
    6. Nah dude, It'll happen just as P-Bandai that's all

      Delete
  2. ...Is it wrong that I'm conflicted about this? On the one hand, I hoped it would never happen just to piss off that suiton douche. On the other hand, maybe now he'll shut up whenever new RGs release.

    ReplyDelete
  3. gahhh!!! i said i'm done with RGs but nooooo... damn you Bandai

    ReplyDelete
  4. A new inner frame would be nice, not to mention the ability to hold its shield bits like the Master Grade.

    ReplyDelete
    Replies
    1. You know that this guy is based on the MG,right?

      Delete
  5. lol i was thinking of buying HG Qan[T]

    ReplyDelete
  6. They will, as a PB exclusive item.

    ReplyDelete
  7. So they keep releasing a completely new 00 RG every year... Where's the rest of our Wing suits, Bandai??? Why not yearly releases of Nataku, Heavy Arms, etc. after Wing Zero? Still waiting!

    ReplyDelete
  8. I will predict, this will be the most commented page. Damn you the most mainstream Kit in the world. Take a look at GBWC malasyian.

    ReplyDelete
  9. Seem to be just a scaled down MG, doesn't look like it'll have much color variety like the first few RGs. Not that interesting to be honest

    ReplyDelete
  10. And finally people can stop complaining bout when the Qant gets a RG~

    ReplyDelete
  11. And here's me minute away from buying the HG, i think i should wait for this one, and buy another kit now yayyyy.

    ReplyDelete
    Replies
    1. I really hope it can do GN Burst action, all the GN tank pulled up

      Delete
    2. I recommend you actually get the hg......rgs are really scary when your the pose you figure everyday type

      Delete
  12. And suiton's ovaries explodes

    ReplyDelete
  13. DAILY LIFE

    When i dont see info from gundam guy about almost one day, and in the evening of the day, i was go to the google and search "gundam guy", when loading finished, i want click title of *Gundam Guy* for open the website, but when it is loading (above the title it self ) there was four colomn info of images for today, and number one of the photo images is rg quanta, i was 0.0 ...., and in my mind ( really? Rg wing gundam ver ew are not release yet, but there was other next rg and the prototype was on the expo now.... and other mind *it is to early* and my heart speak * there is it! Finnaly!* ), when open the web, i was want fast see the info if it was true, and when i see it 0.0 oo yes it really get released, and then open new page for rg oo qnt for see the image and coment, and then oh well, CLICK COMMENT BUTTON, AND THEN PUBLISH IT, and CLICK.

    BTW, well on my predicsion for P-Bandai:

    1. P Bandai rg quanta, Trans Am ver
    2. P Bandai rg quanta, add on full saber part+ decal
    3. P Bandai rg quanta, "GN Bits flying around+stand
    Like rg strike freedom does, but this now it is for
    Sword it self, so it looks flying around like on the
    Movie"
    4. 0.0 P Bandai , add on part for GN Ring ( burst+
    particel floating )
    5. *if it is really happen* P Bandai, rg quanta, "quanta
    burst mode ver/ add on part+ stand+ gn particle.

    For the kits it self, well hope it ks not use inner frame from rg exia, because, well, doent matter, and yeah long awaited for this kits. MUST SOLID!

    ReplyDelete
    Replies
    1. Even I would only expect Premium Bandai releases for just the Trans Am colors and then maybe an add on set for the Full Saber.
      That's it.
      The others you listed are excessive and unlikely.

      http://gundam.wikia.com/wiki/Real_Grade
      According to Gundam Wikia, the RG 00 Qan[T] will be using the "Advanced MS Joint 7".
      RG Exia and RG 00 Raiser both used the Advanced MS Joint 7.
      So I expect to see some similar/nearly similar parts.

      Delete
    2. Hi der suiton might wanna fix your grammar there

      Delete
  14. Judging by the arms it dosent look like the same inner frame as exia/00

    ReplyDelete
    Replies
    1. (Source: http://gundam.wikia.com/wiki/Real_Grade)

      RG Exia and RG 00 Raiser both used the Advanced MS Joint 7. And according Gundam Wikia, the RG 00 Qan[T] will also be using the Advanced MS Joint 7.

      So the hands looking a little different is reasonably expected or maybe it could be because what we are seeing is a prototype that they will refine in the coming months.

      Delete
  15. What's next on the popularity train? There's been Gundam, Zeta, Seed and Destiny, Wing, and 00. I'm feeling Nu or Unicorn if I may be so bold. Those or the Gundam from Origin.

    ReplyDelete
    Replies
    1. Perhaps we will see more Seed or specifically Destiny?
      - Infinite Justice
      - Saviour
      - Force Impulse
      - Sword Impulse
      - Blast Impulse

      Those still have not been made yet.

      And then there's things like

      - Aegis
      - Legend
      - Providence

      Delete
    2. Oh, suiton, your ovaries are exploding...

      Delete
  16. is it just me or this looks like the HG, not very impressed, but it might just because this is a prototype. Might be my first RG if this turns out exist my expectation. And I call Full sabre p-bandai

    ReplyDelete
    Replies
    1. It looks better than the HG.
      The HG had that derpy looking face that looked more like Exia than it was supposed to be.
      And this is a prototype so details and whatnot are bound to change; even if it is the slightest.

      In terms of P-Bandai, I expect:
      - Full Saber "Expansion Set"
      - Trans Am version --> of which I still find weird how the HG and MG did not get a 00 Qan[t] Trans Am

      Others I dunno about. Maybe the ELS ver if they want to get crazy.

      Delete
    2. Derpy Face? Maybe just you, the HG is fine for me. You just hate HG kits, that's all.

      Delete
  17. I love 00 and my favorites are the 00 and 00Q.... but I'm kinda annoyed that they haven't ventured into more series is all :/ I really want like a rg shinning or god Gundam or possibly more from UC such as ZZ or a hyaku saki (spelling is probably off) I hope though the most though that they make a rg tallgeese or Epyon after the wing very ka. But this is just my opinion still might buy it but who knows. Hopefully there will be a way to use the buster sword without additional supports *crossing my fingers*

    ReplyDelete
    Replies
    1. Well so far, the RG line has been based on the super popular series and have been only the main units so far.
      I wouldn't expect too many of those.
      It would be nice to see RGs for others series so things like:
      - Shining
      - God
      - X
      - X Divider
      - Double X

      But the thing is that other series are super popular like Unicorn, Seed, Destiny, 00, etc.
      Or other series are more relevant like Iron Blooded Orphans, Origins, etc.
      And well, RGs are not something that come out so often.

      So what we get is quite a blessing.

      In regards to RGs in the near future, I expect another round of Destiny perhaps or maybe the rest of the Wing series?

      Delete
    2. It would take time to create new advanced MS joint for other series. Of course some of the famous MS will come to RG series, we just have to wait...

      Delete
    3. Unlike HGs, the complexity of making Real Grades is equal to, or at least comparable to, the making of new Master Grades. The only difference is that Real Grades have a lower price compared to Master Grades and this contributes to them being more profitable. But if we look at the complex construction required to pull off these amazing kits on the 1/144 scale, I'd say we're even lucky we have a regular release schedule. If and when Bandai decides to invest heavily on the RG, then we might see a bit more variety on the releases, maybe even go monthly.

      Delete
    4. If RG's next release after 00 Qan[T] is UC related, maybe ZZ or Nu, then suiton will throw tantrums since Bandai ignores his wishlists again.

      Delete
  18. Hoping for the 00 qan t full saber, but if it is p bandai, i think i wont buy this kit

    ReplyDelete
  19. If its qant full saber, ill definitely buy this but seeing it will be p bandai i think i will pass

    ReplyDelete
  20. Damn you Bandai! Just go ahead and take all my money already. I'm powerless to resist the temptation.

    ReplyDelete
  21. And here comes the weight issues!

    ReplyDelete
  22. Hope they fix the side heavy issue that haunted the mg ver badly

    ReplyDelete
  23. and probably the first issue with this is the shield is heavy

    Other than that wish it had more of that two tone effect...after the first few rgs they somewhat lessened that

    Hopefully though......this will be better than the master grade

    ReplyDelete
  24. bandai always release 2 rg every year

    ReplyDelete