PG 1/60 RX-0 Unicorn Gundam (Release Date: Dec 11th 2014, Price: 21600 Yen)
GG INFINITE: ORDER HERE (MAR 2015 RE-ISSUE)
PG 1/60 RX-0 Unicorn Gundam LED Set (Release Date: Dec 11th 2014, Price: 12900 Yen)
GG INFINITE: ORDER HERE (MAR 2015 RE-ISSUE)
P-Bandai PG 1/60 Unicorn Gundam Full Armor Part Set (Release Date: Jan 2015 ,Price: 7020 yen)
GG INFINITE: ORDER HERE
.jpg)
Gimmicks:
PG Unicorn
>Fully transformable (Face guard "expansion" included)
>"Third form" realized
>Red psychoframe in special glow plastic
>"Transformation" uses magnet in antenna; Interior of the antenna is gold color
>Articulation of the elbow and knee joints able to perform a wide range of movements
Accessories
1 Beam Magnum
1 Shield
1 Hyper Bazooka
1 Display Stand
2 Beam Gattling Guns
4 Beam Sabers
Ammo Packs for Beam Magnum.
*Weapons can be mounted onto Display base.
PG Unicorn LED Set
>For use with Psychoframe with 29 LED units, and one for the eyes, making the total 30 LED units
>LED light up sequences: camera eyes light up, psychoframe light up from low light to full light on
>There is an auto mode for LED light up sequence
PROMO VIDEO
UNICORN MODE TO DESTROY MODE TRANSFORMATION VIDEO DEMONSTRATION
*From Destroy Mode to the 3rd Form, it take about 4 minutes for the transformation!*
Video by kura pon
*It takes approximately 7 minutes to fully transform the PG 1/60 Unicorn Gundam!*
Video by kura pon
[Updated 12/16/14] *NEW*
PG 1/60 Unicorn Gundam and the PG 1/60 Unicorn Gundam LED Set will be re-issue in March 2015.
[Updated 12/12/14]
[Updated 12/10/14]
[Updated 12/5/14]
[Updated 12/2/14]
[Updated 11/28/14]
[Updated 11/26/14]
[Updated 11/23/14]
[Updated 11/21/14]
Offical Images
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
[Updated 11/19/14]
PROMO VIDEO IMAGE GALLERY
[Updated 11/7/14]
[Updated 10/28/14]
[Updated 10/25/14]
[Updated 10/24/14]
Look like a big MG Unicorn..
ReplyDeleteagree
DeleteI thought the exact same thing. IF this really is the PG I am not quite as impressed as I expected to be.
DeleteSomehow Unicorn's design cannot modified more further because it's modern enough already, unlike previous MS which already released as PG before.
DeleteYou say it like PG's look severly different than their MG counterpart. What did you expect?
DeleteIt should; It is the same gundam after all.
DeleteWhat matters however is if they improved on the Master Grade's faults and provides that perfect grade build experience.
I'm still not sold yet, but I'm interested in seeing a hands on of the kit.
It says they'll show the sample on 11/21, so i guess this "is" a MG?
DeleteYep, thinking the exact same thing. No extra detail or anything on the outside by the looks of it.
DeleteI don't think that's the actual or even a prototype thing yet...
Delete(OP here) I said that because i expected it to look more the novel art (more bulky). The MG is too slim and the PG is same as MG. No more detail too so really disappointed for me.
Deleteso many people whining about how it's identical to the MG version...
Deletewe, gunpla builders, in terms of PG, not looking excessively at the outer frame. PG is all about inner frame and mechanism!!!
PG is always searching for new technologies for its future gunpla kits, so be sure to thank ur modern HG/RG/MG model cause no PG technologies, no modern gimmicks in gunpla u all seen today
IMHO, outer frame this time is about 80-90% identical to the MG version, but thats because in such a complex mechanism for Unicorn the mechanic designer cant do anything more shit to be more complex than it is
at a first glance, the PG looks very identical to the MG in terms of outer frame. however, after looking a bit more closely, the outer frame is looking a bit more solid in one place and the other. the gray panel behind the white panel makes the outer frame more rigid than the MG one (if u ever built the MG version, u might understand what i mean for rigidness in the outer frame)
also, i see the joint in this is looking promising. arm is using flexible joint technologies which can makes it longer reach to the other side of the body. however! im a bit confused with how the joint is in diagonal side... a new joint technology, perhaps...
the elbow joint is supported more with solid gray inner frame, which im assuming would be pretty rigid.
i cant say anything more for the torso cause there must be some kind of new mechanism to be more rigid than the MG.
the leg. well, the knee frame looks awesomeeeee!!!! the gray frame in that, ooooh.... must be RIGID!!
the MG Unicorn builders would know the frustration in the leg mechanism, so this time we could rest assured for now...
seriously, Bandai... no rear image after this kind of teaser... BURN!!!!!!!
lastly, the head. my guts and feeling after looking the head is confused. the v-fin, i dont know how to say it, DIFFERENT than the MG. thats my gut tells me.
the eye i think is covered in very transparent clear plastic in front of it, judging by the light reflection on it.
the turrets, finalllyyyyy!!! the MG version really suck with it, so finally we have a decent turrets on the head.
ok, thats my analysis according to the image we provided by Bandai-teaser.
tell me what u guys think please :3
EXACTLY
ReplyDeleteReally does looks like a blown up MG. Definitely not the amount of detail that I'd expect from a PG...
ReplyDeleteNot sure what it is, but I don't get the PG vibe from the pictures.
ReplyDeleteMaybe its the lack of decals?
No PG kit has a lot of decals. PG kits are all about inner frame. For this a good deal of the inner frame is the psycho frame.
DeleteThe proportions are looking better than they did on the MG
ReplyDeleteagree, it's like MG
ReplyDeleteFull Armor Pack as a P-Bandai Exclusive? Seems legit since the model is already huge enough.
ReplyDeleteDoesn't look like a PG. Not that I'm saying it looks bad but it just looks like exactly the MG.
ReplyDeleteIt's just a low-res image, anyway.
Oh boy, full armor parts are a P-Bandai online exclusive.
ReplyDeleteSeriously, who DIDN'T see that one coming?
what is "Third form" realized?
ReplyDeleteIt... looks EXACTLY like the MG. I have the MG sitting right next to me and I spot not a single difference.
ReplyDeleteIsn't this supposed to be a higher grade?
My MG wing looks better than its PG equivalent. And my MG strike and PG strike are neck and neck. Then there's my wobbly PG raiser.
DeleteHell, RGs are cheaper scaled down MGs and PG quality kits.
I'm not sure what you expect out of the PG line outside more gimmics & maybe more detail on that inner / outer frame.
Dude if ur pg strike and mg strike are the same detail u might wana look into that.
DeleteRM Strike came out a good deal later, integrating a lot of that PG strike's detail. Namely why its a toss up in terms of how good both look.
DeleteThe only thing, outside size, I could say the PG has on the RM is a better cockpit.
the newer mg strike is hella good looking and is almost as good as the pg, not sure id go as far as neck and neck though
DeleteThe legs still seem like their out of proportion based off this picture......
ReplyDeleteLooks like Full Armor equipment will be a Hobby Online Shop exclusive.
ReplyDeleteindeed look like a oversize MG unicorn, hardly any gimmicks show like all other PG. bandai, show me wat can this babe do...!!!!!
ReplyDeleteWhy am I not surprised at full armor parts for P Bandai. What next? P Bandai full armor Unicorn (Awaken Version)?
ReplyDeleteMg + nu ver ka hand = pg?
ReplyDeletei think that's a moded mg the hand looks like a ver 3.0, proportions of arms and legs seems like its modded too
ReplyDeleteI am wondering about this "Third Form" they are mentioning. Is it a full inner frame with Pyschoframe Form or it is something else.
ReplyDeleteAnd it does looks like a "Big MG" though.
Mg + nu hand = pg..?
ReplyDeleteMg + nu hand =pg
ReplyDeleteWait until it lights up
ReplyDeleteOh hey, you can see that new kind of clear plastic they're using.
ReplyDeleteHaters gonna hate. Big MG watever. Be grateful they re willing to show the sneak peek to us. Cant people w8 and see.
ReplyDeletenothing special..
ReplyDeletedon't judge yet until you fully see the full features of this PG
ReplyDeleteThe only difference in details that i noticed are the grey pieces behind a few panels, such as the knees and the crotch. Otherwise, like everyone said before me, its identical to the mg in appearance.
ReplyDeleteWell folks, if you expect PG Unicorn will be like PG Strike on modified detail basic, you're wrong. When PG Strike's design are based from Gundam Evolve's Strike, Unicorn doesn't have alternative design like Strike does, which make it will always look same regardless the grade. In other words, it doesn't have alternate design or interpretation.
ReplyDeleteIn the first hand, are old PGs have excessive detail like PG Strike do? Nope. Even PG 00 Raiser and SF looks same as their MG counterparts IMO.
That kind of explains why PG been underwhelming especially with how flat looking Katoki's SF looks.
DeleteI guess you never seen the Novak version of the unicorn. Also, in my opinion pg sf doesn't look close to the mg. but I will agree riser does look little bit closer to each other but that can be explained by pg raiser coming out way before the mg,
DeletePG SF does NOT look the same as MG SF. MG SF is sleeker, better-looking IMO. PG SF is boxier in the torso, and has that stupid gimmick where the DRAGOONs jut off the mounting points for some reason.
Delete@kelvin
Deletesorry but, is the Novak version is official source like Gundam Evolve's Strike or fanmade one? If it's the later you can't use that as reference.
I think it's just Bandai messing with our minds. Let's wait till the 21st November to see the real deal. Whatever happens will be good anyway-if there is not much difference than the Mg other than LEDs and better poseability am gonna save money by not getting it and if the kit is much more than that am gonna have a great Christmas!!
ReplyDeleteI agree if its turns out like the picture then I can go buy other kits with that money
Deletei can make some extra details on it, the legs in specific. doesn't look like its been cleaned up by a pro at all, just straight build for now. no stickers either. ver. ka or riot.
ReplyDeletewe might be overthinking the third form though. most PGs have panels that can open, or maybe we can turn the LEDs on really bright so its like the psycho frame is resonating with anothers.
I think that's the MG version, but look at the v-fins and the ammo for the beam rifles though. It's either a pro painted that or it IS the PG
ReplyDeleteSeriously, what did you guys expect? Given the design of the MS, there isn't much they can do anyways. The unicorn doesn't have that same "mechanical" feel as the traditional MS designs in the first place. The main things we should be looking forward to are the articulation and the light-up gimmick.
ReplyDeleteif you compare the MG to the picture on this page http://en.gundam.info/gunpla/pguc/ which is a bigger version of the new one posted above, you can clearly see there's a lot more panel detail (little notches, lines, holes and things). the details on the head are much sharper and the red plastic appears to cover more of the inner frame (like in the shoulders). Also if you go to dalong and look at the inner frame of any of the unicorn MGs and compare them to the picture of the inner frame of the PG, they are completely different beasts. So yes, externally they look similar (as they should, they're the same mobile suit) but its not like they've just scaled up an MG...
ReplyDeletein other news, I still want to know what this "third form" stuff is about...i wonder if that will leak before the announcement...
its the FA FORM bro..
Deletethe third form realized is the "destroy unchained" when all the panels opened up
DeleteWhy the comment section more interesting than the PG unicorn itself?
ReplyDeleteYou never fail to impress me guys 'slow clap'
Third form is full armor
ReplyDeletei dont think the 3rd form is FA. 1 is because they would call it FA in the 1st place instead of 3rd form, since FA is already a known term before the announcement of the PG. 2 is because the "3rd form" is categorized under "PG unicorn." and not under "leds part" or the "FA parts".
ReplyDeletemaybe 3rd form is the awakening mode
DeleteLooks like a big Pic of the MG Version but with lights...
ReplyDeleteCan anyone confirm that it is an mg, maybe by checking against panel lines of the existing mg. The larger image of head and chest is a different model than the kit shown in full. The unicorn v fin is sightly different. And the full model might even be a render.
ReplyDeletei think that might be the real pg unicorn because look at the hands
ReplyDeletePlot twist, the "third form" is that it can turn into MG Unicorn.
ReplyDeleteBetter acguy to be a PG
ReplyDeleteIf you look at the full body one, it appears to be 3d model. I think they are showing off the 3d model as a teaser, and on Nov 21st, they are gonna show actual built model. We will just have to wait till next month.
ReplyDeleteI agree.
DeleteMG Unicorn on steroid? Nah I better buy a magnifier for my mg unicorn and it cost far less too ;)
ReplyDeletei would expect a PG RX-0 Unicorn Gundam to have a clear transparent psyco frame with GRAY back ground. and when the LED is turned on, thats the time itwill display RED lights. whats on the picture looks more like the MG. such a waste.
ReplyDeleteThis is the PG Unicorn I bet. The head is bigger, unlike the MG. Also, there are more lines/ticks/marks? than the MG
ReplyDeleteWill it come with green psycho frame pieces for the awaken version???
ReplyDeleteso many people whining about how it's identical to the MG version...
ReplyDeletewe, gunpla builders, in terms of PG, not looking excessively at the outer frame. PG is all about inner frame and mechanism!!!
PG is always searching for new technologies for its future gunpla kits, so be sure to thank ur modern HG/RG/MG model cause no PG technologies, no modern gimmicks in gunpla u all seen today
IMHO, outer frame this time is about 80-90% identical to the MG version, but thats because in such a complex mechanism for Unicorn the mechanic designer cant do anything more shit to be more complex than it is
at a first glance, the PG looks very identical to the MG in terms of outer frame. however, after looking a bit more closely, the outer frame is looking a bit more solid in one place and the other. the gray panel behind the white panel makes the outer frame more rigid than the MG one (if u ever built the MG version, u might understand what i mean for rigidness in the outer frame)
also, i see the joint in this is looking promising. arm is using flexible joint technologies which can makes it longer reach to the other side of the body. however! im a bit confused with how the joint is in diagonal side... a new joint technology, perhaps...
the elbow joint is supported more with solid gray inner frame, which im assuming would be pretty rigid.
i cant say anything more for the torso cause there must be some kind of new mechanism to be more rigid than the MG.
the leg. well, the knee frame looks awesomeeeee!!!! the gray frame in that, ooooh.... must be RIGID!!
the MG Unicorn builders would know the frustration in the leg mechanism, so this time we could rest assured for now...
seriously, Bandai... no rear image after this kind of teaser... BURN!!!!!!!
lastly, the head. my guts and feeling after looking the head is confused. the v-fin, i dont know how to say it, DIFFERENT than the MG. thats my gut tells me.
the eye i think is covered in very transparent clear plastic in front of it, judging by the light reflection on it.
the turrets, finalllyyyyy!!! the MG version really suck with it, so finally we have a decent turrets on the head.
ok, thats my analysis according to the image we provided by Bandai-teaser.
tell me what u guys think please :3
I know PG's are all about the inner frame, but until we see such inner frame and the mechanisms that hold the knee, joints and shoulders we can easily compare it to the MG.... after all you did say it "looks very identical to the Master Grade in terms of outer form".
DeleteThe Unicorn is a very detailed and recent design so I don't think there's much that they need to change externally from the MG
Deleteyeah, it will all comes clear in 11/21
Deleteit looks identical for outer frame, but what more can u do with it...?
even if i were the lead mechanic designer for the PG, the MG is already enough for white panel design in the outer frame so i would just do better panel line with it and make it more STEADY than the the MG.
if u guys expecting the outer frame in the PG would be like PG Strike etc, then u are dreaming...
it's next to impossible to do that while separating white panel for transformation and the space for LED unit in that...
the outer frame design for PG Unicorn would be closer to the original design, just like PG RX-78-2, Zeta, MkII, or GP01
ofc, that's my assumption for now until 11/21 lol
Well, I'll be damned. The "Third Form" is just like the maintenance mode for older PG, with some of the outer frame can be opened like getting maintenance or something.
DeleteThe LED, not all that impressive i must say, compared to my possibilities for the LED earlier. Nothing that i resent, i'd still buy it tho lol
Then again, after looking the latest picture, this PG is just like heaven and hell between the MG version. Truly fits the PG line. Looks solid enough, plenty gimmicks to play, and great on the shelves too lol
Lastly, the FA expansion. Im not hellbent over the expansion, but Bandai...really?
P-Bandai...? And i looked it not really fit the PG-like details on it...
Im currently thinking if it would be worth to buy it or not at ALL...
Still it's a PG, so damn right i'd buy all the stuff of it (except the FA, think twice first) lol
Will it come with awaken psycho frame pieces???
ReplyDeleteActually guys, for the "third mode".....there's a chance that they just give you an option to switch on the LEDs while it's in Unicorn mode and called it a "pre-Destroy mode", or NT-D start-up mode or something, or maybe it's a burst mode like Quanta has.
ReplyDeleteEither way, I'm pretty much off put by the head right now since it doesn't look mean enough! Hopefully an image from a better perspective comes out.......or I'll just make sure it stays in Unicorn mode when it's out.
hm, not a bad thought i must say
Deletetheres ton of possibilities for the "Third Mode" so we will be teased for the rest of this month till 11/21
curse you, bandai, for giving us this new kind of PG teaser different than the other PG advertisement style...
Have to agree with you on that about the third mode and these are still images before the final product so hopefully they will make the unicorn head more dynamic and mean looking. Also hope for some green psycho frame pieces for the awaken version but do i beg on my hands and knees for a PG BANSHEE
DeleteThe eyes give me a Gundam F91 vibe for some strange reason
ReplyDeleteI'm just curious, what will happen if Bandai Launch next Unicorn gundam in RG...
ReplyDeleteReally disappointed. Don't look like the novel version at all : Not bulky enough. And the third form is not really impressive for me.
ReplyDeleteThe video promo is insane. Though I was hoping for more hatches and panels for the 3rd form to make it a bit more different from the regular destroy mode.
ReplyDeleteI'm not yet sold with the FA Form but I'll reserve until I see more pics of it
does the mg have the pop ups between the shoulders and the head?
ReplyDeleteAm sold for the Mobile Suit, but for the LEDs am still not impressed. If the LED set just consists of 30 UV SMDs, then no way. I'll be cancelling the preorder for it and just order 100 SMDs for 5$ on Ebay.
ReplyDeleteBut the PG Unicorn is just WOW!! Your money is ready BANDAI. It would have been nice if the parts came as in the video, but I don't think so,lolz!!
I'm actually surprised that we haven't gotten any word on a possible next PG kit. I mean Unicorn is great and all and it's cool that it has an LED set and not that cool with the Full Armor being an add on set... I'm just surprised it wasn't a smaller guy like Exia or 00 Qan[t]. Those 2 would've been an awesome choice.
ReplyDeleteWhat the hell is wrong with you? Do you have some sort of mental condition or are you just that stupid? Why would there be any kind of announcement for the next PG when the Unicorn hasn't been released yet? Do you have any clue how long it's been since we had a PG release? Why the hell would bandai make a stupid decision and release a PG exia or qant? Unicorn is one of the most recent series and highly popular it should be the newest PG. Hell Bandai apparently didn't even see either of those designs worthy of being a PG release when OO was airing. There's no need to start now. Let's by releasing the PG unicorn it's a given we will see a PG Banshee in the future with the Born parts as a exclusive.
Deletedun say that you are not surprised, just be blunt and say that you wish. Really, how many pg kits do u think they announce in a year? strike freedom was 3 years ago. Unicorn announced in september this year, and u want them to announce another. Wow, can i be ur girlfriend? cuz u sound like an afluent guy. Plz stop CowCrapping.
DeleteI never realized PG Strike Freedom is already 3 years old, huh. Wow, years flies by so fast.
DeleteIt's suiton we're talking to here. He doesn't care about any other gundam except exia, 00 raiser, or qan[t].
DeleteHe's basically retarded.
Someone please mod this thing so it can transform itself with a flick of a switch... *heavy breathing....
ReplyDeleteSo the third form is the open hatches around its body.
ReplyDeletethe only real change is the destroy unchained, and is not so impressive.
ReplyDeletei was hoping something like the change between the Mg RX 178 mkII and the PG version of it.
What a complainer. Then make your own PG unicorn, and lets see if you can surpass this unimpressive PG unicorn... Wahaha!!!
Deleteselfish kids these days..
DeleteThe video confirms what I suspected: this is just a bigger MG. I am not buying this thing.
ReplyDeleteOh man, it might be the hype, but I definitely prefer the proportions of the PG Destroy Mode to the MG's. It has a lot more panel line details and has more gimmicks. If you're fine with the MG that's awesome too, a testament to Bandai's engineering, but this PG looks too clean to pass up for me :)
DeleteWhich MG Unicorn do you have that isn't a brick? IS there an unknown release that can actually bend its knees or elbows past 45 degrees? Unless you have a MG kit that is unlike the ones that have been publicly available you really can't consider this just a bigger MG...
Deleteare you retarded? how is it so when it has better joint articulation, i mean dude you're judging based on this, wait for the kit reviews from consumers man. And what're you expecting, for it to look a lot more different than the MG?
DeleteDo ypu even own the MG? ...i guess not. The knees joints are completely different from the MG, also there are lot more panel and weapons options everywhere. I guess you're just an idiot that speak and never buy something. Bandai don't need your money, chill down.
DeleteWhy did the promotional video turned private.
ReplyDeleteThey re-uploaded it with more languages.
Deletehttps://www.youtube.com/watch?v=vXF9l0mtS9A
This comment has been removed by the author.
ReplyDeleteI do have some concerns with how thin the lower joint in the knee looks. Wonder if it will affect the legs strength.
ReplyDeleteyeah that knee gap opening is so ugly when it's bend. Wish they made the knee cap cover that the way PG Strike Gundam does.
DeleteSuck a mother fucking dick. We would ALL like to see you do better you over opinionated piece of shit!
DeleteReleasing exactly a week for my birthday!!!! this will make my year!!! XD
ReplyDeleteThis is what you call perfect well-proportioned great detail there's nothing more I could ask for, It's like following the path of pg strike evolve look loving that destroy unchained mode this kit is a must buy thumbs up Bandai!
ReplyDeleteAnd I just bought and assembled my MG not so long ago T T. Now I hope they'd release PG banshee at some point since it got the same mechanics anyway, and I would tear my wallet to buy that!!
ReplyDeleteMany of you guys are disappointed because of the external design of the PG being too close to the MG design. But of you will look closer, try to compare it to the MG, you would appreciate the small details from the panel lines to the armor separation. Yes there's no big difference like that of the MG strike and its PG counter part but the design of the Mg Unicorn Gundam is already too complex to make major customization. If you want more details then you could just customize it. What matters most is the articulation of the internals.
ReplyDeleteI don't understand why people are complaining about this PG Unicorn. PG Unicorn is clearly better than MG in any ways. Just the proportion itself is a big win! Do a close comparison, MG's head is way too small and the legs are way too long in destroy mode. How is PG being too close to the MG design? They are both based on the same mobile suit! It would be really hard for them to sell this model if they change too much or adding too much details which may not be in someone's taste (Heck! People are already complaining about the 3rd form for not being impressive already) Stay close to the original! I don't understand why people are thinking "the head doesn't look mean enough" I mean com'on look at it! The head looks exactly as it is in the OVA or even the beautiful box art. What else do you want?! Modified it if you are not happy with it. Don't have the skill? Why do you even complain then?
ReplyDeleteWhat I think Bandai has done with the extra details is enough and just right. Plus, the LED light is a dream come true! If Bandai didn't make the LED people is going to complain: "Why 00 raiser has LED, this one doesn't? I will only buy it if it comes with LED" I remember when someone modified the HG Unicorn with light up LED posted on Youtube. OMG! That was the prettiest thing I have ever seen! Bandai now give us the option, I am grateful!
Keep in mind. None of our models cost much to make, material wise. Most of the money they are asking for are the amount of time and the design they have spend and come up with. I personally don't think this PG Unicorn would be PERFECT without the light up feature. Ha! You call a Destroy mode Unicorn a PERFECT unicorn without glowing psycho frame?
When people find a room for they can complaint about, even when te plamo itself is good in the first place, they will complaint.
DeleteI couldn't agree more with you. I myself have the MG Unicorn Gundam and I have to say, I can't wait to get my hands on the PG :D
Deletefinally!
Deletesomeone with a common sense of what fun about the PG...
many common people ranting on and on again how it was MG ripoff, but not with us who really enjoy what the gunpla is supposed to mean is to have fun building it!
maybe you all who complain never really appreciated the joy of building gunpla or other plamo...
the PG line is supposed to show the world new gimmicks/technology in building gunpla or plamo
this is the sole reason Bandai let us enjoy and have new fun ways to built
if you are not going to buy, then so be it. but if you are going to complain how the design sucks or yadda-yadda-yadda, then you must feel how the designers really put their hearts designing this kit and also to other kits
if you wanna complain again, please read/watch the review later on then figure out if it's worth or not
to complain when all you do is just bitching around when you dont actually built it by yourself...
really to be ashamed for all of us builders...
On top of all of that, you all have to realize. 1) The MG and PG line are both used to develop each other. MGs are used to develope their PG counterparts and PGs are used to develop the next MG. Its all in the history of gunpla. 2) Bandai doesn't make these products for any one specific person. For those of you complaining, did you personally call Bandai and ask them to develop a model kit for you? If you did, then you're a self serving idiot who doesn't deserve to call yourself a modeller. These products are built for the masses. NOT YOU! The world of plamo is bigger than you so get over yourself. If you're a fan, them be a fan. If not, then suck it up and wait for somthing else. But don't rip on someones hard work because they didn't do what YOU wanted. I dare ANY of you that complain, to design a Gundam, engineer the materials and instructions so you have a model kit and see how everyone reacts to it. I guanrantee that you will be disappointed by how many people will hate your shit. So get over yourselves.
DeleteBlame 'Anonymous October 23, 2014 at 7:39 AM' who started this nonsense ranting. hahaha
DeleteTHE BEAST HAS BEEN UNLEASHED!!!!!!!!!!!
ReplyDeleteunicorn were spoilt by the PG strike gundam. Seeing as it was a huge leap in design over the mg strike 1.0, I'm kinda guessing...
ReplyDeleteAnyway, the unchained mode looks great.
That's it. It is at least 40% master grade and 60% perfect grade but I still like it.
ReplyDeleteCAN'T WAIT TO HAVE THIS AS MY FIRST PG!!!!!!!!
ReplyDeleteI'm on the same boat with you dude!!
Deleteis better than mg unicorn.ok?pg unicorn is good..
ReplyDeletekeep your mouth shut,hater..
if pg unicorn really perfect,gunpla is no more fun..hater,just buy some plaplate to your self
i think that the one transforming the unicorn to destroy mode on the video never transformed a unicorn gundam before. lol it seems like it's his first time
ReplyDeleteMaybe someday we will see people saying "what, it doesnt move by its own? it is more of a MG. I am not buying that brick!" Oh well..
ReplyDeleteI think these transforming videos might hurt sales a little. I was so hyped for it until i saw that i suffered from some of the same issues as the mg. Namely the shoulders and arms not having that comfortable sweet spot of force when transforming them. Now since it will be my first pg im a little on the fence between this or the more mechanical aspected Mk II
ReplyDeleteWhat is the purpose of "unchained" mode?
ReplyDeleteHave more room to let the psychoframe escape while stopping a colony laser ? :p
DeleteI'm assuming that its to show off more of the LED lights
Deleteto get your wallet vomit cash
DeleteAlthough I've already pre-ordered it, I have to say it's lack of details even compare to the RGs.. kinda understand why people saying it's like a MG. It will be a different story if with the LED unit though.. The size + the 32 LED units looks amazing. However the kit itself is not that impressive, though the proportion will be much better than the MG and GFFMC.
ReplyDeleteBandai are forcing you to get the LED unit in order to make the whole purchase meaningful.
What details? Unicorn are designed without excessive detail on first place, and even other than strike other PGs didn't have excessive details like RGs. Don't compare PG with RG, which they are designed with different purpose.
DeleteI'm asuuming its to show off more of the LED lights
ReplyDeleteOkay, I know that having a new PG kit is a huge thing as they are very scarcely made but is it really necessary to have it showcased on your website almost every day? I have actually grown tired of seeing Unicorn at this point because whenever I check the new updates from this site each day during down time at my job, the first thing I usually see is the PG Unicorn.Even one of my friends who is a huge fan of Unicorn Gundam has grown tired of seeing it every time he logs onto this site.
ReplyDeleteI'm not trying to start any arguments but this is just my honest opinion right here. I apologize if I have offended or annoyed some of you by just stating my opinion on the constant updating of the PG Unicorn.
I've pre-ordered it with the LED unit but only half of all that pre-ordered here in Thailand will get it this December...Distributor says something about the LED units being defective.... Hope everything goes well..
ReplyDelete